Mitsubishi Outlander PHEV key fob battery
3 of the 9 model years listed for the Mitsubishi Outlander PHEV have a proven battery. The most common answer is CR2032. Rows below run oldest to newest; a year can appear twice when the car came with more than one kind of key.
- 2018-2020Smart key
CR2032
FCC ID OUC644M-KEY-NTwo sites agree: uhs-hardware.com and bestkeysupply.com (checked Nov 2, 2026)
Find CR2032 on Amazon - 2021Unknown
Not confirmed yet
- 2022Unknown
Not confirmed yet
- 2023-2026Unknown
Not confirmed yet
Changing the battery
Smart key (push-button start)
- Most push-button fobs hide a metal backup key. Press or slide its catch and draw the key out first.
- Use the slot where the metal key sat. Twist, do not lever hard, and work along the seam until the halves separate.
- Before you take the old cell out, look at its face. Put the new cell in with the same side showing, and avoid touching both faces at once.
- Snap the halves back together, slide the metal key home, and press each button, then try the start button from the driver's seat.
A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.
Keep spare coin cells away from small children. A swallowed coin cell can burn the throat within hours; if it happens, go to an emergency room at once.