Infiniti QX55 key fob battery

Smart key (push-button start)

1. Start by freeing the hidden metal key: there is a latch or slide on the case, and the blade comes out once it moves.
2. Look inside the empty key slot for a notch. Put the tip of the metal key or a small flat screwdriver wrapped in tape there and twist gently until the shell splits.
3. Before you take the old cell out, look at its face. Put the new cell in with the same side showing, and avoid touching both faces at once.
4. Snap the halves back together, slide the metal key home, and press each button, then try the start button from the driver's seat.

Infiniti Intelligent Keys normally hold a mechanical key behind a release knob; the slot behind it is where you pry.

A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.