Cadillac CTS-V key fob battery

Separate remote fob

1. This remote is its own fob, separate from the metal key, which makes it one of the easier ones to open.
2. Turn it over: some older fobs use one small screw, newer ones just clip. Pry at the seam once any screw is out.
3. Replace the cell, keeping the + side where it was, and check the small metal tab still touches it.
4. Reassemble and test from a short distance.

A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.

Smart key (push-button start)

1. Most push-button fobs hide a metal backup key. Press or slide its catch and draw the key out first.
2. Use the slot where the metal key sat. Twist, do not lever hard, and work along the seam until the halves separate.
3. Before you take the old cell out, look at its face. Put the new cell in with the same side showing, and avoid touching both faces at once.
4. Close the case until it clicks all the way round, put the metal key back, then try the buttons and a push-button start.

Cadillac smart remotes commonly hide a key behind a side button. With it out, the case opens at the bottom slot.

A CR2032 is 20 mm across and 3.2 mm thick. CR2032, CR2025 and CR2016 share the same width but not the same thickness, so a swap between them can leave a loose contact or a case that will not close.